Tuesday 23 June 2015

Working of CD's

How CDs Work


CDs and DVDs are everywhere these days. Whether they are used to hold music, data or
computer software, they have become the standard medium for distributing large quantities of
information in a reliable package. Compact discs are so easy and cheap to produce that America
Online sends out millions of them every year to entice new users. And if you have a computer
and CD-R drive, you can create your own CDs, including any information you want.
In this article, we will look at how CDs and CD drives work. We will also look at the different forms
CDs take, as well as what the future holds for this technology.

Understanding the CD

A CD can store up to 74 minutes of music, so the total amount of digital data that must be stored on a CD is:
               44,100 samples/channel/second x 2 bytes/sample x 2 channels x 74 minutes x 60
                seconds/minute = 783,216,000 bytes

To fit more than 783 megabytes (MB) onto a disc only 4.8 inches (12 cm) in diameter requires
that the individual bytes be very small. By examining the physical construction of a CD, you can
begin to understand just how small these bytes are.

A CD is a fairly simple piece of plastic, about four one-hundredths (4/100) of an inch (1.2 mm)
thick. Most of a CD consists of an injection-molded piece of clear polycarbonate plastic.
During manufacturing, this plastic is impressed with microscopic bumps arranged as a single,
continuous, extremely long spiral track of data. We'll return to the bumps in a moment. Once the
clear piece of polycarbonate is formed, a thin, reflective aluminum layer is sputtered onto the disc,
covering the bumps. Then a thin acrylic layer is sprayed over the aluminum to protect it. The label
is then printed onto the acrylic. A cross section of a complete CD (not to scale) looks like this:
Cross-section of a CD
 A CD has a single spiral track of data, circling from the inside of the disc to the outside. The fact that the spiral track starts at the center means that the CD can be smaller than 4.8 inches (12
cm) if desired, and in fact there are now plastic baseball cards and business cards that you can put in a CD player. CD business cards hold about 2 MB of data before the size andshape of the card cuts off the spiral.
It is approximately 0.5 microns wide, with 1.6 microns separating one track from the next. (A micron is a millionth of a meter.) And the elongated bumps that make up the track are each 0.5
microns wide, a minimum of 0.83 microns long and 125 nano meters high. (A nanometer is a billionth of a meter.) Looking through the polycarbonate layer
at the bumps, they look something like this: You will often read about "pits" on a CD instead of bumps. They appear as pits on the aluminum side, but on the side the laser reads from, they are bumps.

The incredibly small dimensions of the bumps make the spiral track on a CD extremely long. If
you could lift the data track off a CD and stretch it out into a straight line, it would be 0.5 microns
wide and almost 3.5 miles (5 km) long! To read something this small you need an incredibly precise disc-reading mechanism. Let's take a look at that.

CD Player

The CD player has the job of finding and reading the data stored as bumps on the CD. Considering how small the bumps are, the CD player is an exceptionally precise piece of
equipment.
The drive consists of three fundamental components:
• A drive motor spins the disc. This drive motor is precisely controlled to rotate between
200 and 500 rpm depending on which track is being read.
• A laser and a lens system focus in on and read the bumps.
• A tracking mechanism moves the laser assembly so that the laser's beam can follow the
spiral track. The tracking system has to be able to move the laser at micron resolutions.
Inside a CD player

Inside the CD player, there is a good bit of computer technology involved in forming the data into
understandable data blocks and sending them either to the DAC (in the case of an audio CD) or
to the computer (in the case of a CD-ROM drive).
The fundamental job of the CD player is to focus the laser on the track of bumps. The laser beam
passes through the polycarbonate layer, reflects off the aluminum layer and hits an optoelectronic
device that detects changes in light. The bumps reflect light differently than the "lands"
(the rest of the aluminum layer), and the opto-electronic sensor detects that change in reflectivity.
The electronics in the drive interpret the changes in reflectivity in order to read the bits that make
up the bytes.

The hardest part is keeping the laser beam centered on the data track. This centering is the job of
the tracking system. The tracking system, as it plays the CD, has to continually move the laser
outward. As the laser moves outward from the center of the disc, the bumps move past the laser
faster -- this happens because the linear, or tangential, speed of the bumps is equal to the radius
times the speed at which the disc is revolving (rpm). Therefore, as the laser moves outward, the
spindle motor must slow the speed of the CD. That way, the bumps travel past the laser at a
constant speed, and the data comes off the disc at a constant rate.
Data Formats
If you have a CD-R drive, and want to produce your own audio CDs or CD-ROMs, one of the
great things you've got going in your favor is the fact that software can handle all the details for
you. You can say to your software, "Please store these songs on this CD," or "Please store these
data files on this CD-ROM," and the software will do the rest. Because of this, you don't need to
know anything about CD data formatting to create your own CDs. However, CD data formatting is
complex and interesting, so let's go into it anyway.
To understand how data are stored on a CD, you need to understand all of the different
conditions the designers of the data encoding methodology were trying to handle. Here is a fairly
complete list:
• Because the laser is tracking the spiral of data using the bumps, there cannot be
extended gaps where there are no bumps in the data track. To solve this problem, data is
encoded using EFM (eight-fourteen modulation). In EFM, 8-bit bytes are converted to 14
bits, and it is guaranteed by EFM that some of those bits will be 1s.
• Because the laser wants to be able to move between songs, data needs to be encoded
into the music telling the drive "where it is" on the disc. This problem is solved using what
is known as subcode data. Subcode data can encode the absolute and relative position
of the laser in the track, and can also encode such things as song titles.
• Because the laser may misread a bump, there need to be error-correcting codes to
handle single-bit errors. To solve this problem, extra data bits are added that allow the
drive to detect single-bit errors and correct them.
• Because a scratch or a speck on the CD might cause a whole packet of bytes to be
misread (known as a burst error), the drive needs to be able to recover from such an
event. This problem is solved by actually interleaving the data on the disc, so that it is
stored non-sequentially around one of the disc's circuits. The drive actually reads data
one revolution at a time, and un-interleaves the data in order to play it.
• If a few bytes are misread in music, the worst thing that can happen is a little fuzz during
playback. When data is stored on a CD, however, any data error is catastrophic.
Therefore, additional error correction codes are used when storing data on a CD-ROM.
There are several different formats used to store data on a CD, some widely used and some
long-forgotten. The two most common are CD-DA (audio) and CD-ROM (computer data). If you
would like more information on either of these formats, the following links will help:
• Audio Compact Disc - Writing and Reading the Data
• CD/ROM - An extension of the CD audio standard
• HP Storage Technical Intro